The company fully implement of IATF 16949 quality management system，widely used SPC, MSA, FMEA, APQP, PPAP and other quality management tools,use zeiss CMM, Taylor Hobson roundness and roughness instrument, projection analyzer, Leica cleaning apparatus and particle size analyzer, metallographic analyzer, Germany Marr height meter, automatic thread tester and other testing equipment,ensure compliance and consistency of online products.

1.Ensure internal and external quality defects are reviewed in a timely and systematically analyzed and improved in accordance with the prescribed response plan

2.The company set up a progressive reporting system, the operator found the process problems report in immediately.

3.The guide operation specification is controlled, easy to take, the operator according to the guide work

4.Ensure that the key parameters and process parameters are monitored to ensure the stability of the product. Check the detecting device regularly, ensure its reliability.

5.Define the scope of the instrument,monitor and control the gauges effectively

6.Define tooling life and track. Quality assessment for removal.

7.To ensure the quality of equipment, tools, fixtures, procedures, parameters and so on, after the interruption of the process control, to confirm the products before and after the interruption, to meet the specified target value.

8.Test parts set up identification and management, make a distinction between normal parts, after testing for scrap processing, if need to use must be qualified.

9.All parts are identified and fixed area, avoid mixing; all defective parts to ensure traceability

10.Provide rework operation and inspection instructions

11.Need to rework in specified time or quantity range, by qualified personnel in the specified device or position